Step 1: CLEAR DEBRIS
Regularly check and clear debris from the inside of your spouting.
Step 2: CHECK BRACKETS
Check brackets are intact, spaced max 500mm apart and spouting has even fall towards outlet to avoid water ponding. (Min 5mm per 10m)
Step 3: CHECK EXPANSION JOINER
Unclip 2-part expansion joiner, clean the rubber seal of any dirt or grit and re-lubricate with a silicone based lubricant before reassembly.
Step 4: CLEAN ONCE PER YEAR
Wash your Marley spouting system annually using warm soapy water and a soft bristled brush or cloth. Rinse with clean water.
Step 5: PAINTING
Clean spouting and allow to dry. Apply mineral-based undercoat and two coats of acrylic paint.
N.B Do not paint inside of spouting or brackets, darker colours require additional expansion allowance.
